Success story by Miviko d.o.o.
Our company purchased one Automatic Feeding + Hot/Cold Mixing Plant for cables grade soft PVC dry-blend preparation from PROMIXON, consisting of heating mixer type XM-400/VS and horizontal cooling mixer type XC-1200 as a part of our PVC pelletizing line, intended for production of PVC granulate for our cable production.
From the beginning of our selection process, through its expertise and strong competences, PROMIXON has distinguished itself as the highly professional and reliable partner. Their extensive knowledge and unbiased suggestions helped us a lot to define and fine-tune the best solution for our project.
In our project, Promixon was also responsible for the overall integration of their plant with equipment purchased from third parties, such as pelletizing line and feeding supra-structure (silos). Their Project department submitted several instances of project layouts, which have been drawn-up efficiently and punctually, until the best one had been chosen.
The equipment was delivered on time, installed, set-up and successfully commissioned in April 2017. During the installation and commissioning, Promixon highly skilful, friendly and helpful personnel proved their competences and helped us in integration and putting the plant into operation, far beyond the scope of their obligations and even our expectations.
The training was comprehensive and efficient, so our personnel gained necessary skills for autonomous operation and maintenance of the line in very short time.
Since putting in operation the plant is working flawlessly; the operation is as easy as it can be, due to Promixon intuitive operating interface (HMI) and maintenance is very simple.
For all above mentioned, we would again choose Promixon as our partner, therefore I would recommend Promixon with high confidence to all companies seeking for professional mixing solutions.
Success story by Pulverit S.p.A
Our partnership with Promixon began in 2015 with the purchase of a complete bonding system for powder coatings, type XBOND-MC/1000/3600/B and continued in 2016 with the order of three containers Mixer FX with capacity of 2500 liters each one.
The first job with Promixon satisfied us very much because we needed to bonderize large amounts of technology products with “friable” materials, with the risk of disintegration or damage of its crystal structure at a mixing speed too high. Promixon therefore followed our needs and designed an ad-hoc solution, able to ensure a good quality of the bonderized material, together with a reliable and easy use for the operators of bonding plant.
In 2016, instead, we had the necessity to order three FX Container Mixers with much urgency, for the pre-mixing of thermosetting resins with pigments, fillers and additives.
Promixon has succeeded in manufacturing, delivering and installing the mixing systems within the requested timing, also exceeding our expectations with regards to the high quality mixing, the usability and a significant saving in cleaning and maintenance times. Even the pre and post-sales service, followed by Promixon professional technicians, was fast and scrupulous.
Therefore, we are sure to have chosen the proper and reliable supplier for our mixing requirements and we are convinced that our cooperation with Promixon will be long and successful.
Thanks & Best Regards
Success story by Mondoplastico S.p.A
New mixing plant XBLEND-MO/1200/2 x 2500
We were completely satisfied with the supply of the mixing plant that you have provided, consisting of a High Speed Turbomixer with volume of 1200 liters and two High Efficiency Horizontal Coolers with volume of 2500 Lt.
The job we did was not easy but, thanks to your contribution, we put into operation a complete calendering line in a very short time.
You followed us with great care in all pre and post-sale phases, by helping us in the best way, and adopting all our additional technical requirements.
Promixon has thus gained from our side to be a reliable supplier.
Goodbye for the next projects we have underway.
Success story by Athena S.p.A
We commissioned to PROMIXON the manufacture of a 600 Lt Turbomixer, last March.
The plant was delivered, with a little delay, in early September and therefore is in function for about three months.
Athena’s production and laboratory managers have expressed great satisfaction for the performance of the new Turbomixer, which perfectly meets the requirements and specifications agreed.
I must therefore express the full satisfaction of my staff for the new mixing plant and the choice of working with Mr Marinello and his team.
PROMIXON has demonstrated itself as a company extraordinarily careful to our needs, very competent in the design stage of the machine and very helpful during installation, done by a very qualified staff. Even the administrative side was followed by PROMIXON with impeccable reliability and punctuality.
I wish to emphasize the extreme availability and correctness of Mr Marinello during all stages of design and installation of the machine.
I believe that the support of reliable and qualified suppliers is a winning strategy in any type of business. For this reason, I feel clear in stating that PROMIXON represents for ATHENA, and might be in the master-batch production, that kind of supplier.
Success story by Poly Balkans Ltd.
With this letter, I would like to inform You, much of my satisfaction, on the great performance of the PROMIXON production line.
After 25 years of experience in the compound, PVC-P and PVC-R field, I can assert the efficiency of the production line, formed by a 1000 lt turbomix and a 2500 lt cooler, tested and brought to speed by myself.
What makes this production line better than others is:
–the high security level;
–the possibility of mixing any kind of plasticized material that contains different mineral charges so as to make homogenous dry powder, with high performance and without any parameters variations during the extrusion phase;
–the turbomix ease of cleaning during the colour changes due to the blades configuration and the deflector position that make the shaft self-cleaning;
–the high efficiency cooler, that eliminates the internal and external condensation problem.
As regards the performance in quantitative terms it has:
–7,5-8,5 batch/hour of 400 Kg with temperatures set between 105 and 110 °C, different set point and products insertion speed.
A special thanks to everyone in Promixon, to Your person and to all your collaborators: you have realised a company based on professionalism, dynamism, research and clients’ satisfaction.
Success story by Logical International
We contacted PROMIXON ABOUT SUPPLYING A SYSTEM FOR mixing WPC + PVC DRY-BLEND, WPC + PP/PE.
I must say that the experience and the expertise that I encountered in PROMIXON staff greatly impressed me but, above all, made me happy, because they recommended the right solution for what I produce, their pre-sale suggestions and advice were efficient and tailored to the way our business is organised.
With this letter Logical International would like to express their gratitude towards PROMIXON for the interest they showed to us. We felt like a real business PARTNER and not just a client to whom they were trying to sell something. Our satisfaction with the delivered product was their satisfaction of a job well done.
They made us feel important because they were driven by a desire to help us, providing us with a strong, extremely high quality product that worked perfectly right from when it was installed, with an impeccable trial, comprehensive and quick post-sale care and today – a year after the system was commissioned –it still functions perfectly, no downtime and guaranteed production has been achieved.
The investment we made with PROMIXON resulted in a substantial gain for our company.
Thanks for being a reliable, meticulous, honest and dedicated partner and for giving your all in your work.
Success story by Cardinal S.r.l.
Our company purchased a High Speed Turbomixer and a Horizontal Cooler from PROMIXON, to be part of a new and performant PVC pelletizing line.
The mixing plant was delivered on time, set up and finally tested on July 1st, 2014. The PROMIXON team proved its expertise and everything worked fine from the beginning.
Working with the PROMIXON mixing plant is straightforward, since it has a friendly and intuitive programming interface. The PROMIXON training was very effective, so that our operators managed to quickly understand and control the mixing plant’s programming. We are also very satisfied with the remote assistance from PROMIXON specialists, which allowed us to further enhance our work with the mixing plant.
The PROMIXON mixing plant is operating flawlessly and its maintenance is very easy.
We are happy to say that we made a very good choice by having PROMIXON as our partner!
Success story by Vision Extrusions
Vision Extrusions Limited would like to express our satisfaction with the purchase of Promixon PVC Dry-Blend Mixing Plant in our Woodbridge, Ontario compounding facility.
Promixon was commissioned to design, manifacture, install and start-up a mixing system utilizing their Turbomixer and Horizontal Cooler to prepare PVC dry-blends and also their horizontal blender type HMX – 6600/VS to homogenize blends.
Promixon design team was very knowledgeable, professional and supportive during the design phase of the project. They provided technically advanced options and suggestions that were tailored to our needs and desires.
The equipment was shipped and delivered on-time in perfect condition and in a convenient manner. This allowed us to facilitate an orderly installation and start-up.
During the start-up phase the Promixon technicians were proficient and very cooperative. Vision operators were provided with excellent information and instructions throughout this process.
This system has been in operation for a number of months and has definitely lived up to Vision’s expectations. The ease of operation, quick change-over and performance has translated into products of superior quality and consistency.
Vision is very pleased with our purchase. Promixon has proven to be a first-rate company with superior technology and people.
Success story by Lareter
Promixon was commissioned by Larter company to produce a High Speed Turbomixer and a Horizontal Cooler. The hot/cold mixing plant was delivered by the agreed time and tested on August 11, 2014, it is at operating speed since three months and I feel bound to express my satisfaction for having chosen to “work” with Promixon.
Promixon proved itself as a reliable company made up of passionate and expert people, who can understand the market needs but above all the desired of its customers. Needs and desired do NOT always match and the difference is substantial.
Professional, brilliant and extremely effective, all Promixon team has been able to respond quickly to every LARETER request, both of an administrative and technical purpose. Promixon well supported our requests during the negotiation providing all the necessary guarantees, strengthened by the competence and excellence of its products.
The delivery times and testing have been impeccable, the after-sales service has been complete and fast. The mixing plant, despite relevant customizations, perfectly managed, is respecting the desired performance but above all has a really intuitive and easy to use human-machine interface. The remote management service with Promixon team allowed us to manage in a high-performing way the first start-up days permitting the operators a total training assistance.
At a technical level, it is extremely remarkable the water circuit in the Horizontal Cooler cooling jacket and the polishing of the mixing vessel, which allows a total and quick cleaning and empting of the Turbomixer itself. Investing is really complicated and brave these years and choosing professional partners who keep their promises of quality, performance and complete assistance makes everything easier. Well done!